Pallet Jacks

Move palletised loads quickly, safely and without a forklift with a quality pallet jack. Also known as a hand pallet truck or pallet trolley, this is the single most essential materials-handling tool in any warehouse — letting one operator lift and transport heavy pallets across the floor with minimal effort. Whether you’re loading docks, picking orders or shifting stock, a reliable pallet jack keeps your operation moving.

Built from heavy-duty steel with a sealed hydraulic pump, our pallet jacks are engineered for smooth, dependable daily use. An ergonomic three-position control handle (lift, transport and lower) makes operation easy on the operator, while entry and exit rollers help the forks glide under pallets and reduce physical strain. They’re sized to suit standard Australian pallets, including Chep and Loscam.

Why Choose a Quality Pallet Jack

A good pallet jack pays for itself in productivity and safety. It lets one person move loads that would otherwise need several people or a forklift, speeding up everyday tasks while reducing manual handling injuries. The sealed hydraulic system delivers controlled lifting and slow, safe lowering, and durable wheels keep loads stable and easy to steer across concrete and hard floors. With fewer moving parts than powered equipment, a manual pallet jack is also low-maintenance and cost-effective.

Key Features

• Heavy-duty steel construction with powder-coated finish
• Sealed hydraulic pump with slow-lowering hand control valve
• Ergonomic three-position control handle (lift / transport / lower)
• Nylon or polyurethane main wheels and entry/exit rollers
• Standard 685mm fork width to suit Australian pallets (Chep, Loscam)
• Fully adjustable pushrod under the forks
• Low effort, low maintenance and easy to operate

H2: Types of Pallet Jacks

Choosing the right pallet jack comes down to your loads and your space:

• Standard pallet jack — the everyday workhorse, typically 685mm wide with ~1150mm forks and 2,000–2,500kg capacity.
• Narrow pallet jack — 450mm or 520mm fork widths to suit Euro pallets and skids.
• Low-profile pallet jack — lower minimum fork height for thin pallets and low stillages.
• High-capacity pallet jack — built for heavy loads beyond 2,500kg, up to 5,000kg.
• Quick-lift pallet jack — rapid lifting for lighter loads in fewer handle strokes.
• Stainless steel pallet jack — for hygienic, wash-down or corrosive environments.

Browse our full materials handling range and warehouse storage equipment to equip your operation, or speak with our team for advice on the right model for your pallets and floors.

H2: Specifications

Specifications vary by model, so always confirm the details for the unit you choose. As a guide, typical hand pallet jacks offer:

• Load capacity: commonly 2,000–2,500kg (high-capacity models up to 5,000kg)
• Fork width: 685mm standard (450mm/520mm narrow options)
• Fork length: approx. 1,150mm standard
• Lowered fork height: approx. 85–90mm (lower on low-profile models)
• Wheels: nylon or polyurethane main wheels with entry/exit rollers

H2: Safe Operation and Workplace Compliance

Pallet jacks move heavy loads in busy workplaces, so safe operation matters — never exceed the rated capacity, keep loads centred and stable, watch for foot and pedestrian hazards, and use the handbrake (where fitted) when parked. Regular maintenance of the hydraulics and wheels keeps them safe and reliable. For guidance, refer to:

• Safe Work Australia — national guidance on hazardous manual tasks and workplace handling.
• SafeWork NSW and WorkSafe Victoria — state WHS regulators with practical materials-handling advice.
• Equipment should meet relevant Australian Standards where applicable — ask your supplier for details.

H2: Frequently Asked Questions

How much can a pallet jack lift? Most standard hand pallet jacks lift 2,000–2,500kg, with high-capacity models rated up to 5,000kg. Always stay within the rated capacity.

Will it fit Australian pallets? Yes — the standard 685mm fork width suits common Australian pallets like Chep and Loscam. Narrow 450mm/520mm models suit Euro pallets and skids.

What’s the difference between a standard and a low-profile pallet jack? A low-profile jack has a lower minimum fork height, so it fits thin pallets and low stillages that a standard jack can’t get under.

Manual or electric — which do I need? Manual jacks are ideal for everyday loads and shorter distances. For high volumes, long distances or very heavy loads, an electric pallet truck reduces operator fatigue.

How do I maintain a pallet jack? Keep the wheels clean, grease the key fittings, check the hydraulics for leaks, and have it inspected regularly for safe operation.

H2: Conclusion

Reliable, efficient and easy to operate, a quality pallet jack is the backbone of any warehouse, dock or factory. With heavy-duty steel construction, smooth sealed hydraulics and the right fork size for your pallets, it keeps your loads — and your operation — moving safely. Browse our range or get in touch for expert advice today.