5800 Series Heater

Do you need powerful, reliable heat for your garage, workshop or greenhouse? Then the 5800 Series Heater is built for the job. It’s a rugged, steel-constructed fan-forced electric heater. So it delivers fast, even warmth wherever you need it. Above all, it’s tough enough for hard-working spaces like garages, workshops and job sites. In short, it’s a dependable heating workhorse that simply plugs in and runs.

This heater is made to last. For example, it’s built around a durable steel housing and a steel tubular heating element. As a result, it stands up to demanding environments. In addition, the fan-forced design pushes warm air out across the space, rather than just radiating from one spot. So you get quicker, more even heating throughout the room.

Why Choose the 5800 Series Heater

The 5800 Series is all about power, control and safety. To start, its 4000-watt element delivers up to 13,652 BTU of heat. So it warms a workshop, garage or greenhouse quickly and effectively. In addition, a built-in thermostat holds your chosen temperature automatically. As a result, the heater cycles on and off to keep things consistent — without wasting energy.

Safety and convenience are built in, too. For example, a manual-reset limit control guards against overheating. In addition, power-on and overheat pilot lights show the heater’s status at a glance. Plus, it mounts to a wall or ceiling on the included bracket, which keeps it up and out of the way. So it frees up valuable floor space in a busy workshop or greenhouse.

H2: Key Features

• Rugged, steel-constructed fan-forced electric heater
• Powerful 4000-watt element — up to 13,652 BTU output
• Built-in thermostat for consistent, automatic temperature control
• Manual-reset limit control for added safety
• Power-on and overheat pilot lights
• Wall/ceiling mounting bracket included
• Steel tubular heating element for durability
• 240V single-phase power
• 6′ (approx. 1.8m) cordset
• Compact footprint — 10⅝” W x 11″ H x 9⅝” D
• Ideal for garages, workshops, job sites and greenhouses

H2: Specifications

• Type: electric fan-forced unit heater
• Power: 240V, single-phase
• Wattage: 4000 W
• Heat output: up to 13,652 BTU
• Current draw: 16.6 amps
• Heating element: steel tubular
• Controls: built-in thermostat + manual-reset limit control
• Indicators: power-on and overheat pilot lights
• Mounting: wall/ceiling bracket included
• Cordset: 6′ (approx. 1.8m), with NEMA #6-30P plug
• Dimensions: 10⅝” W x 11″ H x 9⅝” D (approx. 270 x 279 x 244mm)

Browse our full greenhouse heating and climate-control range and greenhouse accessories, or speak with our team for help choosing the right heater for your space.

H2: Ideal Applications

The 5800 Series suits a wide range of working and growing spaces. For example, it’s a great choice for garages and home workshops, where it delivers quick, even warmth on cold mornings. In addition, it’s well suited to job sites and sheds that need rugged, portable heat. It also works for greenhouses, helping protect plants and hold a steady temperature through winter. So wherever you need dependable electric heat, it delivers.

H2: Electric or Gas — Which Heater Suits You?

Choosing the right heater matters, so it helps to compare. An electric heater like the 5800 Series is simple and clean: it runs on power, needs no flue or gasfitter, and installs easily on a wall or ceiling. So it’s ideal for garages, workshops and small-to-mid greenhouses. A gas unit heater, like the Modine Hot Dawg range, delivers higher output for large or commercial greenhouses, but it needs professional gas installation and venting. So choose electric for an easy, plug-in solution, and gas for large spaces. For a 2-in-1 heater-and-fan, see the Phoenix greenhouse heater.

H2: Installation and Safety (Australia)

A few points are worth noting before you install. First, the 5800 Series is a 4000-watt, 16.6-amp appliance, so it draws significant power. As a result, it needs a suitable 240V circuit and the correct outlet. Please note the supplied plug is a NEMA #6-30P (a North American 240V pattern), so a licensed electrician should confirm the right Australian connection and circuit for safe use. In addition, mount it securely on the included bracket, and keep the airflow clear of plants and materials. For guidance on safe electrical use, your state energy safety regulator (for example, Energy Safe Victoria) is the authority to check.

H2: Frequently Asked Questions

What is the 5800 Series Heater? It’s a rugged, steel-built fan-forced electric heater. So it delivers fast, even warmth for garages, workshops, job sites and greenhouses.

How powerful is it? It’s a 4000-watt heater with up to 13,652 BTU of output. So it heats a workshop, garage or greenhouse quickly and effectively.

Does it have a thermostat? Yes. A built-in thermostat holds your chosen temperature automatically, and a manual-reset limit control adds safety.

How is it mounted? It comes with a wall/ceiling bracket, so you can mount it up and out of the way to save floor space.

What power does it need? It runs on 240V single-phase power and draws 16.6 amps. So a licensed electrician should confirm the right circuit and outlet for your site.

H2: Conclusion

In the end, the 5800 Series Heater is a powerful, rugged and dependable way to heat a garage, workshop or greenhouse. It combines a tough steel build, a strong 4000-watt fan-forced element, a built-in thermostat and handy safety features — all in a compact, wall-mountable unit. So browse our heating range or get in touch for expert advice today

electric garage heater, workshop heater, fan forced heater, greenhouse heater, electric unit heater, 240V garage heater, wall mounted electric heater, shed heater, industrial electric heater, electric heater with thermostat, 4000 watt heater, garage heater Australia, electric greenhouse heater, job site heater, greenhouse heating